FM7300 Series Multi-Point Lock

With extra heavy-duty construction capable of withstanding tornado wind speeds and flying debris, the FM7300 Series Multi-Point Lock is designed to help secure community shelters and safe rooms—even under the most hazardous conditions. It is available in multiple function and trim combinations, offering the flexibility needed to accommodate a full range of door opening solution, including electronic access control.

FEATURES

  • UL-certified for both FEMA P-361 (2015) and P-320 (2014) and ICC-500 (2014)
  • Vertical latch dogging feature available for easier daily use
  • Adjustable top and bottom rods prevent bolt drag from warped door conditions
Functions

Passage Lever x Blank Plate

 

 Name

Description  
01 f-7300_multi_point_lock_01 Passage Lever x Blank Plate
  • Thumbturn retracts & projects deadbolt
  • Trim inside retracts latchbolt & deadbolt simultaneously
  • Trim outside is always locked
  • Blank outside escutcheon

Single Cylinder with Deadbolt

 

 

   
18 f-7300_multi_point_lock_18 Classroom
  • Inside trim is always locked
  • Inside thumbturn only retracts and projects deadbolt
  • When deadbolt is projected, inside trim retracts latchbolt and deadbolt simultaneously
  • Key outside locks and unlocks outside trim
  • When outside trim is unlocked, outside trim retracts latchbolt and deadbolt simultaneously
24 f-7300_multi_point_lock_24 Storeroom Door
  • Key outside or thumbturn inside retracts and projects deadbolt
  • Trim either side retracts latchbolt
  • Latchbolt & deadbolt operate independently or each other
(F21)
25 f-7300_multi_point_lock_25 Dormitory or Exit
  • Key outside or thumbturn inside retracts and projects deadbolt
  • Trim from either side retracts latchbolt, when the deadbolt is in the retracted position
  • Trim outside is locked, when the deadbolt is projected
  • When deadbolt is projected, trim inside retracts latchbolt and deadbolt simultaneously, unlocking outside trim
(F13)

Non-Keyed

       
14 f-7300_multi_point_lock_14
 Passage or Closet
  • Thumbturn inside retracts and projects deadbolt
  • Trim from either side retracts latchbolt
  • Both inside and outside trim are always unlocked
  • When deadbolt is projected trim inside or outside retracts latchbolt and deadbolt simultaneously
 
66 f-7300_multi_point_lock_66
 Privacy Bedroom or Bath
  • Trim outside retracts latchbolt except when deadbolt is projected
  • Trim inside retracts both latchbolt and deadbolt simultaneously, unlocking the outside trim
  • Emergency release retracts and projects deadbolt - by coin, screwdriver, or emergency key (14-0057) ordered separately
  • Thumbturn retracts and projects deadbolt
(F19)
68 f-7300_multi_point_lock_68
 Privacy Bedroom or Bath
  • Trim from either side retracts latchbolt at all times
  • Thumbturn retracts and projects deadbolt
  • Emergency release retracts and projects deadbolt - by coin, screwdriver, or emergency key (14-0057) ordered separately
  • Latchbolt and deadbolt are independent of each other
(F02)
Trim
Lever

Studio Collection

Aventura Series

 aventura mb

MB

aventura me

ME

 aventura mf

MF


 aventura mg

MG

aventura mi

MI

 aventura mw

MW


 aventura nf

NF


 

Centro Series

 centro mc

MC*

centro md

MD

 centro mj

MJ


 centro mp

MP*

centro nd

ND

 centro nj

NJ

Gramercy Series

 gramercy rag

RAG

gramercy ral

RAL

 gramercy ram

RAM


 gramercy ras

RAS

gramercy rcm

RCM

gramercy rem

REM


 gramercy rgm

RGM


 

Grant Park Series

 grant park h008

H008

grant park h009

H009

 grant park h010

H010


 grant park h011

H011

grant park h007

H007

 

Notting Hill Series

 notting hill ma

MA*

notting hill mm

MM*

notting hill mq

MQ*


 notting hill mt

MT*

notting hill my

MY*


Odeon Series

odeon mh

MH*

odeon mk

MK*

odeon mn

MN*

odeon ms

MS*

odeon mu

MU*

odeon mv

MV*


odeon mx

MX*

odeon ns

NS*

odeon nu

NU*

Rialto

rialto mo

 MO*

rialto mz

MZ*


Wooster Square Series

studio_collection-h001-wooster_square

H001

studio_collection-h002-wooster_square

H002

studio_collection-h003-wooster_square

H003


studio_collection-h004-wooster_square

H004

studio_collection-h005-wooster_square

H005

 studio_collection-h006-wooster_square

H006

Rose Series

studio_collection-co_rose

CO

studio_collection-cr_rose

CR

 studio_collection-e2_rose

E2


t-studio-metro-e3

E3

t-studio0-metro-e4

E4

studio_collection-to_rose

TO

 

t-studio-metro-tr

TR

t-coastal-cr-rose

Contemporary Rose

t-coastal-tr-rose

Traditional Rose

Coastal


t-coastal-ce

Contemporary Escutcheon

t-coastal-te

Traditional Escutcheon


Standard

 

a lever handed

A Lever (Handed)

b lever

B Lever

 standard e lever

E Lever

t-standard-j

J Lever

 standard_l

L Lever

t-standard-p

P Lever


standard w lever

W Lever

t-standard-le1-le2

LE1/LE2 Escutcheon

t-standard-le3-le4 

LE3/LE4 Escutcheon

t-standard-ls

LS Escutcheon

t-standard-lw1

LW1 Escutcheon

t-standard-wt

WT Escutcheon

Rose Series

t-standard-l-rose

L Rose

t-standard-ln_rose

LN Rose

t-standard-o_rose

O Rose

*Not Available in 32 or 32D
Finishes
Finish   Description BHMA
03 Bright Brass, Clear Coated Bright Brass, Clear Coated 605
04 finishes-04 Satin Brass, Clear Coated
606
09 finishes-09 Bright Bronze, Clear Coated 611
10 finishes-10 Satin Bronze, Clear Coated  612
10B finishes-10b Dark Oxidized Satin Bronze, Oil Rubbed 613
10BE  finishes-10BE Dark Oxidized Satin Bronze, Equivalent  613E 
10BL finishes-10bl Dark Oxidized Satin Bronze Clear Coated  
14 finishes-14 Bright Nickel Plated 618
15 finishes-15 Satin Nickel Plated Clear Coated 619
20D finishes-20d
Dark Statuary Bronze Lacquered  
26 finishes-26 Bright Chrome Plated 625
26D finishes-26D Satin Chrome Plated 626
32 finishes-32 Bright Stainless Steel 629
32D finishes-32d Satin Stainless Steel 630
BSP  finishes-bsp Black Suede Powder Coat


Options

Mechanical Options: 

Add Strength

3-

Stainless steel hubs within the mortise lock

Security Fasteners

36-

6 lobe head screws

37-

Spanner head screws

Visual Indicators

49-

Visual status indicator or occupancy indicator with emergency release

50-

Secured indicator rose

Electrical Options

DX-

Deadbolt monitoring – monitors deadbolt position

LX-

Latchbolt monitor – monitors latchbolt position (not available with deadbolt)

TL-

SARGuide illuminated inside WT trim with the work EXIT illuminated

Lever/Knob Combination

68-

8200 Lock furnished w/lever handle outside x knob inside

69-

8200 Lock furnished w/lever handle inside x knob outside

Tactile Warning Options

75-

Tactile Warning: Handicap warning milled on backside of inside lever

76-

Tactile Warning: Handicap warning milled on backside of outside lever

77-

Tactile Warning: Handicap warning milled on backside of both levers

85-

Tactile Warning: Abrasive coating on backside of inside lever

86-

Tactile Warning: Abrasive coating on backside of outside lever

87-

Tactile Warning: Abrasive coating on backside of both levers

Finish Protection

CPC

Clear powder coat

SG-

MicroShield antimicrobial clear powder coat

Thumbturns

LB-

ADA extra-large thumbturn; backplate matches rose design chosen

T1-

Decorative thumbturn; backplate matches rose design chosen

T2-

Decorative square thumbturn; backplate matches rose design chosen

T3-

Decorative cylinder thumbturn; backplate matches rose design chosen

Trim

TR

Working trim only

Cylinder Options:

Conventional Cylinder

 

SARGENT conventional cylinders supplied standard

Degree Key System

DG1

Degree Key System, Level 1 (bump resistant with patented key)

DG1-21

Degree Level 1 Construction Master Keying

DG1-60

Degree Level 1 removable disposable construction core

DG1-63

Degree Level 1 removable core

DG1-64

Degree Level 1 removable construction keyed LFIC

DG1-65

Degree Level 1 Unassembled/Uncombined fixed core component cylinder (packed loose for field keying)

DG1-78

Degree Level 1 exposed plug

DG2

Degree Key System, level 2. Geographic exclusive, bump and pick resistant

DG2-21

Degree Level 2 Construction Master Keying

DG2-60

Degree Level 2 removable disposable construction core

DG2-63

Degree Level 2 removable core

DG2-64

Degree Level 2 removable construction keyed LFIC

DG2-65

Degree Level 2 Unassembled/Uncombined fixed core component cylinder (packed loose for field keying)

DG3

Degree Key System, level 3. Geographic exclusive; UL437 certified; bump & pick resistant

DG3-21

Degree Level 3 Construction Master Keying

DG3-60

Degree Level 3 removable disposable construction core

DG3-63

Degree Level 3 removable core

DG3-64

Degree Level 3 removable construction keyed LFIC

Signature Key System

10-

SARGENT Signature key system

10-21

SARGENT Signature construction key system (lost ball)

10-63

SARGENT Signature LFIC removable core cylinder

XC Key System

11-

SARGENT XC key system

11-21

XC construction key system (lost ball)

11-60

Lock to accept XC-LFIC (removable core) and provided with disposable plastic core; XC-LFIC permanent core ordered separately

11-63

Lock to accept XC-LFIC (removable core); Includes master keying and grand master keying

11-64

Lock to accept XC-LFIC (removable core) and provided with keyed construction core; XC-LFIC permanent core ordered separately

11-70-7P

Lock to accept XC-SFIC (7-pin, removable core) and provided with disposable plastic core; XC-SFIC permanent core ordered separately

11-72-7P

Lock to accept XC-SFIC (7-pin, removable core) and provided with keyed construction core; XC-SFIC permanent core ordered separately

11-73-7P

Lock supplied with XC-SFIC (7-pin, removable core); Includes master keying, grand master keying

11-65-73-7P

Lock provided with uncombinated SFIC (7-pin, removable core); Packed loose

Construction Key System

21-

SARGENT lost ball construction keying for conventional, XC and Signature Series (not available with 63- or 73-)

22-

SARGENT construction split key system for conventional cylinders (existing systems only) (not available with 10-, 11-, 63-, 73-)

LFIC (Removable Core)

60-

Lock to accept LFIC (removable core) and provided with disposable plastic core; LFIC permanent core ordered separately

63-

Lock provided with LFIC (removable core); Includes master keying grand master keying

64-

Lock to accept LFIC (removable core) and provided with keyed construction core; LFIC permanent core ordered separately

SFIC

70-

Lock to accept SFIC (6-pin or 7-pin, removable core) and provided with disposable plastic core; SFIC permanent core ordered separately

72-

Lock to accept SFIC (6-pin or 7-pin, removable core) and provided with keyed construction core; SFIC permanent core ordered separately

73-

Lock provided with SFIC (6-pin, removable core); Includes master keying grand master keying

73-7P

Lock to accept SFIC (7-pin, removable core); Includes master keying grand master keying

65-73

Lock to accept uncombinated 6-pin SFIC; packed loose

65-73-7P

Lock provided with uncombinated SFIC (7-pin, removable core); Packed loose

Keso

81-

Lock provided with housings to accept Keso & Keso F1 removable cores

82-

Lock provided with SARGENT Keso Security Cylinder

F1-82

Lock provided with SARGENT Keso F1 Security Cylinder

83-

Lock provided with SARGENT Keso Security Removable Core cylinder

F1-83

Lock provided with SARGENT Keso F1 Security Removable Core cylinder

84-

Lock provided with SARGENT Keso construction cores

Schlage

SC-

Schlage 'C' Keyway Cylinder '0' Bitted

SE-

Schlage 'E' Keyway Cylinder '0' Bitted

Miscellaneous

BR-

Bump resistant cylinder (available with conventional & conventional XC cylinders only)

LC

Lock provided less cylinder

 

Interested in this product?

Contact Us