Passport 1000 PG Series
Designed specifically for the needs of today's campuses, the Passport 1000 PG Series lock combines centralized security with high quality SARGENT hardware in an efficient, cost-effective solution for comprehensive access control.
Featuring both a keypad and the intelligent One Card solution of PERSONA Campus™ software, the Passport 1000 PG locks with the ease of an offline lock while also providing seamless database integration to customize access control based on lock usage, user, hours, and facilities—without even visiting the door.
The SARGENT Passport 1000 PG lock is available in cylindrical, mortise, multi-point, and exit device configurations.
BENEFITS
- Use with campus’ existing magstripe cards
- Faster, easier installation without need for wiring to an access control system
- Readily integrates with campus transactional and housing systems
Mechanical Options:
|
Add Strength
|
3-
|
Stainless steel hubs within the mortise lock
|
|
Fire Rated
|
12-
|
UL Fire Label Exit Hardware
|
|
Cylinder Dogging
|
16-
|
Cylinder lockdown
|
|
LD-
|
Less dogging for non-fire rated devices
|
|
Less Touchpad
|
19-
|
Push bar without Lexan touchpad
|
|
Backset Options
|
23-
|
3-3/4” backset x 2-1/4” x 1-1/8” front
|
|
25-
|
5” backset x 2-1/4” x 1-1/8” front
|
|
Strike Options
|
23-
|
4-7/8” (124mm) ANSI flat lip strike
|
|
28-
|
#808; lip length 1-1/4”. Lip lengths 1-5/8” to 2-7/8” in ¼” increments only
|
|
OBS
|
Open back strike
|
|
WBS
|
Wrought box strike
|
|
Security Fasteners
|
36-
|
6 lobe head screws
|
|
37-
|
Spanner head screws
|
|
¾” Throw
|
41-
|
¾” (19mm) latch throw
|
|
Flush End Cap
|
43-
|
Flush end cap
|
|
Tactile Warning Options
|
75-
|
Tactile Warning: Handicap warning milled on backside of inside lever
|
|
76-
|
Tactile Warning: Handicap warning milled on backside of outside lever
|
|
77-
|
Tactile Warning: Handicap warning milled on backside of both levers
|
|
85-
|
Tactile Warning: Abrasive coating on backside of inside lever
|
|
86-
|
Tactile Warning: Abrasive coating on backside of outside lever
|
|
87-
|
Tactile Warning: Abrasive coating on backside of both levers
|
|
Finish Protection
|
CPC
|
Clear powder coat
|
|
SG-
|
MicroShield antimicrobial clear powder coat
|
|
Thumbturns
|
T1-
|
Decorative thumbturn; backplate matches rose design chosen
|
|
T2-
|
Decorative square thumbturn; backplate matches rose design chosen
|
|
T3-
|
Decorative cylinder thumbturn; backplate matches rose design chosen
|
|
SARGuide
|
PL-
|
SARGuide PL – Photo luminescent coated push rail
|
|
Windstorm Options
|
HC-
|
Hurricane code
|
|
|
HC4-
|
Hurricane code up to 150 psf
|
|
|
WS-
|
Windstorm rated
|
Cylinder Options:
|
Conventional Cylinder
|
|
SARGENT conventional cylinders supplied standard
|
|
Degree Key System
|
DG1-60
|
Degree Level 1 removable disposable construction core
|
|
DG2-60
|
Degree Level 2 removable disposable construction core
|
|
DG3-60
|
Degree Level 3 removable disposable construction core
|
|
XC Key System
|
11-60
|
Lock to accept XC-LFIC (removable core) and provided with disposable plastic core; XC-LFIC permanent core ordered separately
|
|
11-70-7P
|
Lock to accept XC-SFIC (7-pin, removable core) and provided with disposable plastic core; XC-SFIC permanent core ordered separately
|
|
LFIC (Removable Core)
|
60-
|
Lock to accept LFIC (removable core) and provided with disposable plastic core; LFIC permanent core ordered separately
|
|
SFIC
|
70-
|
Lock to accept SFIC (6-pin or 7-pin, removable core) and provided with disposable plastic core; SFIC permanent core ordered separately
|
|
Keso
|
81-
|
Lock provided with housings to accept Keso & Keso F1 removable cores
|
|
Schlage
|
SC-
|
Schlage 'C' Keyway Cylinder '0' Bitted
|
|
SE-
|
Schlage 'E' Keyway Cylinder '0' Bitted
|
|
30-
|
Lever to accept Schlage fixed core cylinder; no cylinder provided
|
|
SF-
|
Lever to accept Schlage Large Format Interchangeable Core – Supplied less core, tailpiece included
|
|
Miscellaneous
|
LC
|
Lock provided less cylinder
|