Title Document #
541 Shim Kit INSTALLATION INSTRUCTIONS
A8008
545 Alarm Kit Installation Instructions A7224
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
A7925
Installation Instructions for 565 & 665 Metal End Cap Kit
A6924
Installation Instructions for 988/988CR/988Y Surface Bolt MEMN8
Installation Instructions for Door Coordinator & Carry Bar
A5692
Installation Instructions for Exit Device End Cap Mounting Plate
A5027
Installation Instructions for Freewheeling Lever Handle Control A7261
Instruction Sheet for #607 Locking Slide Replacement Kit A7411
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control A6374
Thru-Bolt Instructions for 80 Series 8700,8800 and 8900
A6257
8900, 12-8900, WS8900 & 12-WS8900 Mortise Type Exit Device Installation Instructions
A6705
16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions A6848
43- Flush End Cap Rail Cutting Installation Instructions A7581
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions A7678
55- Signal Switch for 80 Series Installation Instructions A6808
58- Electric Dogging for 80 Series Installation Instructions A6835C
59- Electroguard Delayed Egress for 80 Series Exit Devices A7690
Instructions for Mounting 80 Series Exit Device with Glass Bead Shim Kit
A6710
862/863/864 Pull Trim Installation Instructions A7474
Anti-Vandal Pull Trim (821/824/826/827) Installation Instructions
A5030B
Wiring Instructions for 970 & 971 Electromechanical Mortise Exit Solenoid Locks to ElectroLynx Connector System A7770
57- Delayed Action 80 Series Exit Device Installation Instructions - for devices purchased before 2005 A6810F