SARGENT's Newest Innovations

	SARGENT is proud to announce the Exit Device Security Shim Kit! Building owners today are responsible for maintaining security without compromising life safety - a challenge when using exit devices on full glass exterior doors. The gap between the glass and the exit device can be an area of vulnerability that can compromise safety and security. The SARGENT 541 Exit Device Security Shim Kit fills the gap between the exit device and the glass creating a flush surface. This kit can be easily trimmed and installed to accommodate most doorstyles without removing the push rail exit device. This responds to the increasing need for improved building security while maintaining the facility's aesthetic design.
	SARGENT Introduces a Security SideLite Solution! The SARGENT SSL1 Security SideLite Spring Latch is perfect for those applications that require a security panel. It is a spring-loaded latchbolt retracted by a thumb turn on one side, with no operation on the other. Click here for more information on SSL1
	SARGENT Introduces Beacon! Beacon™ Safe Egress You Can See, Hear & Trust SARGENT introduces Beacon™, a next generation exit device that creates a clearer pathway to safety during an emergency. It’s the newest addition to the ASSA ABLOY LiteGuide™ family of products. MORE THAN AN EXIT DEVICE The combination of audible and visible alerts built into the exit device makes Beacon unique – and effective. connected to the building’s alarm system, when activated Beacon emits a pulse of light and white noise followed by an audible message declaring “exit located here.” A laser light beamed from the exit device forms an arrow shape pointing directly to the illuminated touch bar – allowing occupants to locate the exit and get out quickly. A LIFE-SAFETY INNOVATION In your ongoing efforts to ensure safety in your buildings, count on Beacon as an important tool during emergency evacuations. Beacon makes the opening highly noticeable for all occupants, including those who are hearing- or sight-impaired. Click here for more information on Beacon
	SARGENT Presents Harmony Series! Big features in a small attractive lock. Blends in Beautifully. Everywhere. Reader, monitoring capabilities and Wiegand compatibility beautifully presented in Harmony. Consolidates all components into the lock – card reader, door position switch and request to exit monitoring sensors Installation time reduced by 50% compared to traditional access control installations Open architecture platform Supports HID 125 kHz proximity credentials ANSI Grade 1 quality hardware Aesthetically complemented by Studio Collection and Coastal Series levers Click here for more information on Harmony
	Electro-Mechanical Turbo Program The SARGENT ElectroTURBO Program offers variety, reliability and improved pricing! TURBOship expedites your hardware order and guarantees that your product will be on the job when it’s needed. Our new additions include 12 VDC or 24 VDC, expanded finishes, trims, keying and electromechanical monitoring options! Contact your local ASSA ABLOY Door Security Solutions Representative for more details.
	8200 Mortise Locks perform Above & Beyond! SARGENT is proud to report the continued testing of the 8200 Mortise Lock. The 8200 has completed 14,318,360 cycles! 14 times the BHMA Standard! ANSI/BHMA Cycle Testing Criteria for Grade 1 Mortise Locks is 1,000,000 cycles. SARGENT 8200 Mortise Locks meet and greatly exceed those requirements. Cycle testing of this mortise lock is witnessed and the results are verified by an independent, third party test lab. Verification is available upon request. Stay tuned for more cycle testing results! Please join SARGENT in continuing to Raise the Bar of Excellence!
	SARGENT Proximity Wall Readers SARGENT now offers a complete line of Wiegand based proximity (125kHz) readers to augment our open architecture products (i.e. Profile Series v.N1). The addition of these wall readers will allow for a more complete specification package. The readers interface directly with any Wiegand compatible access control system providing application solutions (e.g. latch retraction) not currently offered with our open architecture products. SARGENT's Proximity Wall Readers: Keyless card activation at 125kHz Wiegand output format Standalone capability Control locking devices (e.g., 56- electric latch retraction exit devices, maglocks, door strikes, etc.) Seamless integration with access control systems Assorted sizes offer compact flexibility for a variety of opening configurations Can be used for interior and exterior applications Available through Authorized Channel Partners only. Contact your local ASSA ABLOY Door Security Solutions sales consultant for details.
	7000 Series Vertical Rod Lock - Now Available For Wood Doors! The 7000 Series Vertical Rod Lock is part of the SARGENT line of multipoint door security devices. Designed for openings that require the additional security of multiple latching points within one locking mechanism, the 7000 Series is now available for both wood and metal doors. The product can be used for both single and double door openings. The 7000 Series is UL listed for 3 hour fire rated (12-) for metal openings. It is also UL listed for 90 minute fire rated (12-) for wood openings. Both metal and wood openings are available with optional no-bottom rod (NB-) and performs well in abusive environments without the need for maintenance. For wood door applications, a cover plate is required. For metal door applications, the cover plate is optional. The cover plate is available in two designs, rectangular (ER) and decorative (ES). These complement the Studio Collection and Coastal Series designer levers. Click here for more information on the 7000 Series
	New Top Retainer Shim Kit for Steel Mullions (601) SARGENT now offers the new top retainer shim kit (601) to make it easy to install all steel mullions in narrow width frame openings. This UL listed option is especially suited for standard double rabbeted 5 ¾" width frames ensuring that the top retainer mounts securely on the narrow soffit. Compatible mullion models include the 980S/12-980, L980S/12-L980, EL980, (12-) HC-980, 12-HD-980 and (12-) HCL980.
	HCL980 Mullion Listed for Severe Windstorm Resistance SARGENT is proud to announce the (12-) HCL980, another new product listed for Severe Windstorm Resistance. This key-removable mullion is designed for use with UL Classified HC8800 and 12-HC8800 rim exit devices for openings that need to meet the following standards: ANSI 250.13, ASTM E330, ASTM 1886, ASTM 1996, TAS 201, TAS 202 & TAS 203. When ordered for fire-rated applications (12-), this mullion has a 3 hour UL rating for applications up to and including 8 feet. For more Windstorm Solutions, click here:
	SARGENT Wins Advertising Excellence Award! SARGENT Manufacturing wins the Advertising Excellence Award from Security Magazine for their 56- Electric Latch Retraction Ad that appeared in the July 2007 issue. The product category was Hardware/Lock Access Control. A July Advertising Readership Survey showed that 47% of the readers responding recognized SARGENT as one of the ads in Security's July issue. SARGENT received the highest overall scores for "Noticed Ad". Click here to see the award
	ALL NEW 421 Cam Action Closer! As part of our ongoing efforts to raise the bar of excellence, SARGENT is pleased to announce the new 421 Cam Action Door Closer. The 421's advanced design provides aesthetics, high efficiency, strong closing force and ADA compliance with track arm applications. Appealing unobtrusive aesthetics and design offering a good choice for architects and designers Top notch performance presenting a wide range of adjustable closing power for use in the most demanding situations A perfect solution for ADA compliant door openings Designed for slide arm and track applications, this door closer has greater efficiency than a track arm rack-and-pinion door closer. It provides a nearly effortless opening, while still presenting an adjustable closing force strong enough for even heavy-duty applications. Click here for more information on the 421 Cam Action Door Closer
	8200 Mortise Locks perform above & beyond ANSI/BHMA Standards! ANSI/BHMA Cycle Testing Criteria for Grade 1 Mortise Locks is 1,000,000 cycles. SARGENT 8200 Mortise Locks meet and greatly exceed those requirements. SARGENT is proud to report the continued testing of the 8200 Mortise Lock. The 8200 has completed 8,011,681 cycles! 8 times the BHMA Standard! Cycle testing of this mortise lock is witnessed and the results are verified by an independent, third party test lab. Verification is available upon request. Stay tuned for more cycle testing results! Please join SARGENT in continuing to Raise the Bar of Excellence! Click here for more information on the 8200 Mortise Lock
	SARGENT's FM8700! The only 2-point exit device in the industry UL listed for single fire door applications! Increasing personal protection from severe weather is at the center of SARGENT's efforts to develop hardware that meets the most stringent building standards for storm shelters. To supplement the listing to the FEMA 361 Tornado standard, the completion of UL testing expanded the application of the FM8700 for use on single fire-rated doors. This is the only 2-point exit device in the industry to meet the FEMA 361 requirements! The FM8700 was also successfully tested to the draft International Code Council (ICC) and the National Storm Shelter Association (NSSA) standard currently under review by the state of Florida. Click here for more information on the FM8700
	281 Series Powerglide New Arm Offerings! SARGENT is pleased to announce new 281 arm offerings, providing a high degree of strength and durability. With forged steel arm construction, oiled bronze bearings and two piece rigid arms, the new 281 arm provide superior wear resistance and ease of installation. 281 Heavy Duty Arms: 281-O10 - Heavy Duty standard application arm 281- H10 - Heavy Duty standard application hold open arm 281- SSO - Heavy Duty standard application security arm (non hold open) 281-PD10 Drop Arm SARGENT's new Heavy Duty parallel arm provides the strength and durability of a heavy duty standard arm Top Jamb Application OT Track Arm SARGENT's new Top Jamb Application OT Track Arm provides a compact door control solution for thin top rail interior doors (36" and under). Click here for more information on the 281 Series Powerglide Door Closer
	SARGENT’s T-Zone 11 Line Cylindrical Lock! Now even easier to install! The T-Zone 11 Line cylindrical lock offers maximum convenience with new “out of the box and onto the door” packaging. Organized parts Simple instructions Tool kit, intuitive packaging and two-piece rose assembly reduces installation time by 33%! Designed for high traffic and high abuse areas, T-Zone sets the standard for strength and durability in a cylindrical lock. Accept no substitute. There is no equal. Click here for more information on T-Zone
	SARGENT Bradford Series 7900 Mortise Lock! Value Without Compromise. In our continuing effort to provide a variety of door hardware products to meet every application need, we’re pleased to present the Bradford Series by SARGENT 7900 Series Mortise Lock. The 7900 Series offers: Quick and easy re-handing and installation Trims that coordinate aesthetically with other Bradford by SARGENT offerings including the Studio Collection Metro Elements levers 22 functions including electrical functions A wide range of architectural finishes Affordable quality with Bradford by SARGENT reliability Click here for more information on the 7900 Mortise Lock
	SARGENT’s Exit Devices Perform Above & Beyond ANSI/BHMA Standards! Round 3 Testing SARGENT is proud to report the continued testing results for the following exit devices: Cycle Testing: 8610 Concealed Vertical Rod Exit Device at 11.3 million cycles 8710 Surface Mounted Vertical Rod Exit Device at 18.6 million cycles 8810 Rim Exit Device at 14.0 million cycles 8910 Mortise Exit Device at 13.7 million cycles ANSI/BHMA Cycle Testing Criteria for Grade 1 Exit Devices is 500,000 cycles. SARGENT 80 Series Exit Devices meet and greatly exceed those requirements. Cycle testing of these exit devices is witnessed and the results are verified by an independent, third party test lab. Verification is available upon request. Please join SARGENT in continuing to Raise the Bar of Excellence!
	Day Light Savings Time Change! IMMEDIATE ACTION REQUIRED! Since 1966, most of the United States has observed Daylight Saving Time (DST) from 2:00 a.m. on the first Sunday of April to 2:00 a.m. on the last Sunday of October. As you know, during DST, clocks are turned forward one hour, effectively moving an hour of daylight from the morning to the evening.On August 8, 2005, President George W. Bush signed the Energy Policy Act of 2005. This Act changed the time change dates for Daylight Savings Time in the U.S. In 2006, Daylight Savings Time began on April 2nd and ended on October 29th, but in 2007, Daylight Savings Time will begin on March 11th and end on November 4th. It is important to note that access control systems that are programmed for prior years will need to be reconfigured to operate properly in 2007. IMPORTANT: Failure to comply with SARGENT’s procedures could result in improper functionality of your lock(s) as related to time-keeping ability and securing openings at specified times of the day. For SARGENT, the Daylight Savings Time change will affect the following stand-alone access control products: Software SARGENT SofLink 1.0 Software SARGENT SofLink Plus 1.0 through SofLink Plus 5.0 Software Software users with the following existing hardware SARGENT Profile Series v.G1 and v.G1.5 SARGENT 4293 Wall Proximity Reader and Keypad SARGENT Low Profile Series SARGENT KU Time Zones SARGENT programmable locks using Time Zones • Standard • Auto Unlock • First-In Auto Unlock SARGENT programmable locks using 24 Hour Time Zones with Audit Trail/Transaction log functions being utilized To accomodate the following DST Changes, please see the Product Bulletin & Frequently Asked Questions documents. Click here for Product Bulletin Information Click here for Frequently Asked Questions
	All NEW 80 Series Exit Device Catalog! SARGENT is pleased to announce the all NEW redesigned 80 Series Exit Device Catalog! Some 80 Series catalog highlights: Additional product images make it even easier to find products and functions - Includes thumb piece and pull designs Product grouping categories - Wide Stile Exit Devices - Narrow Stile Exit Devices - Multiple Latching Exit Devices A simplified fire rating chart Detailed exit device information includes: - Rail sizes with door widths - Available electrical options - Standard and special application strikes - Improved function descriptions - Both SARGENT and ANSI/BHMA numbers provide easy comparisons - ET and product function ordering matrix - Ordering information - Solenoid control product details - Cylinder specifications identified by function Complete listing of Studio Collection Metro Elements, Coastal Series and standard levers Simple mullion comparison chart SARGENT’s new electroluminescent (TL-) and photoluminescent (PL-) exit device options
	New and Improved Manual Dogging Method! SARGENT has implemented a new manual dogging method for all exit devices to increase durability and functionality! This enhanced design will be applied on all series of SARGENT rails. Features: Eliminates unintentional dogging due to jarring abuse or worn parts Easier Dogging - Push in rail and rotate hex dogging key All parts can retrofit to prior exit device models Available in Kit: P/N 68-2596

SARGENT's Newest Innovations

SARGENT is proud to announce the Exit Device Security Shim Kit!

Electro-Mechanical Turbo Program

SARGENT Proximity Wall Readers

New Top Retainer Shim Kit for Steel Mullions (601)

HCL980 Mullion Listed for Severe Windstorm Resistance

SARGENT Wins Advertising Excellence Award!

SARGENT’s Exit Devices Perform Above & Beyond ANSI/BHMA Standards!

Day Light Savings Time Change!

New and Improved Manual Dogging Method!