Features and Benefits

  • Non-volatile memory
  • All programming at keypad
  • LEDs on keypad
    - Green indicates unlocked
    - Yellow indicates programming mode
    - Flashing green and solid yellow indicates deadbolt thrown
  • UL Listed for fire doors (12 - required for KP8800/8900 Series)
  • UL Listed to Canadian safety standards
  • Built-in remote “Request to Enter” requires wire harness (52-2071)
  • User Codes - over 1,100,000 possible user combinations
    - 100 user codes
    - Operates utilizing any one to six digits per code - digits may be repeated or start with “0”
    - One master code - assigns emergency, supervisory and user codes, allows access during low battery
    - One emergency code - allows entry when deadbolt is thrown (KP8276/KP8277) or during low battery
    - One supervisory code - allows temporary lockout of selected users, changes unlock time duration, requests infrared interrogation output, and may add user codes
    - “One time” user codes allows visitors “one time” entry
    - Entry of three wrong user codes in succession disables all codes for ten seconds
    - Unit can be put in “passage only” mode at keypad
  • Keypad made of ultraviolet stable textured material
  • Operating temperature for keypad: 4°F – 140°F
  • Adjustable unlock time
  • Use on exterior doors with weatherseal gasket and shroud
  • Low battery indication - four chirps after code entry
  • Operates with 4 “C” alkaline batteries (included)
  • Typical 40,000 operations per set of batteries
  • Infrared link to DTD to view audit trail

Mechanical Features

  • Certified to ANSI A156.3 Grade 1 requirements
  • Latchbolt 3/4" (19mm) projection
  • Cylinder override use 34 rim cylinder, 8877; 46 mortise cylinder, 8977
  • 8977 not available with 70-, 72-, 73-, 73-7P-, SC- or SE- options
  • Includes code to activate horn when keypad buttons are pushed
  • Center Case Chassis – non ferrous alloy (except 12-KP8877 & 12-KP8878)
  • KP Rim Devices use 649 strike and KP Mortise Lock Devices use C908 strike
  • Rim exit devices are non handed; mortise exits are handed

Ideally suited for

  • Professional offices within a building
  • Side entrances in commercial, retail or office buildings
  • Utility areas or supply closets
  • Server rooms
  • Glass doors

 Schools  Healthcare  Commercial 


ASSA ABLOY, the global leader in door opening solutions

Copyright © 2004—2016 SARGENT Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.

Reproduction in whole or in part without the express permission of SARGENT Manufacturing Company is prohibited.

Policies  |  This site was designed by NewCity