The Harmony Series Exits feature clean, crisp design and are available with many lever designs, including standard levers, Coastal Series levers and Studio Collection levers in 13 finishes. The use of similar lever designs across product lines provides uniformity within a facility.

Sophisticated Access Control Solution

  • Consolidates all components into the lock
    – Incorporates card reader, Door Position Switch (DPS) and REX signaling
    – Eliminates reader interface modules
  • 50% faster installation time, lower installed cost and reduced disruption
    – Requires only one cable run from the lock to the access control panel
    – Maintains architectural integrity around the door
  • Open architecture platform is compatible with all standard access control systems
  • Supports HID 125 kHz proximity credentials or HID 13.56 MHz iCLASS®, including Corporate 1000, to match your card format. No special credentials needed.
  • Aesthetically complemented by SARGENT Studio Collection and Coastal Series levers

Features of Harmony Series Products

  • A hard-wired platform for use with existing Wiegand compatible access control systems
  • Centralized control of all locks using customer's existing access control system
  • For use on exterior doors with appropriate weatherseal gasket 
  • A multi-colored LED indicates card read activity and can be manually controlled by access control panel
  • Audible beep sounds with card reader
  • UL Listed for fire doors available (12- for exit devices)
  • Listed to UL 294 (Access Control System Units). UL 294 is a U.S. only system level certification. For information regarding access control system compliance, please call 800-810-WIRE.
  • UL Listed to Canadian safety standards
  • 12VDC external power required, optional 24VDC operation available (reader always 12VDC)
  • Solenoid Controlled with the option of Fail Safe or Fail Secure
  • ElectroLynx® connector system
  • Monitoring is based on lock type selected

Mechanical Features

  • Certified ANSI/BHMA A156.3 Grade 1
  • Request-to-Exit (REX) Signal Switch activated by pushing rail
  • Key override is available for 8700 SVR Devices with a 306 Series Auxiliary Control
  • For 1-3/4" (44mm) door standard. Consult factory for other thicknesses

Ideally suited for

  • Corporate Campuses
  • Healthcare Facilities

 Schools  Healthcare  Commercial 


ASSA ABLOY, the global leader in door opening solutions

Copyright © 2004—2015 SARGENT Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.

Reproduction in whole or in part without the express permission of SARGENT Manufacturing Company is prohibited.

Policies  |  This site was designed by NewCity